基于物元分析的表层岩溶带“二元”水生态承载力评价

针对目前水生态承载力评价中信息屏蔽和主观性问题,该文以喀斯特典型分布区贵州省为例,在阐述表层岩溶带"二元"水生态承载力概念的基础上,构建表层岩溶带"二元"水生态承载力评价指标体系,结合物元分析法,对贵州省2007—2010年的表层岩溶带"二元"水生态承载力进行定量评价.研究结果表明:2007—2010年贵州省表层岩溶带"二元"水生态承载力等级都为"可承载",整体呈现出比较稳定的发展趋势,但是"可承载"水平并不稳定,不完全符合No2的标准."可承载"水平不稳定.贵州省表层岩溶带"二元"水生态承载力的主要提升因子是地表产流率、输沙模数、森林覆盖率、水资源利用率等8个,而单位面积地表水资源量、生态用水率、工业废水排放达标率、工业固体废物综合利用率以及城镇化率等9个成为制约贵州省表层岩溶带"二元"水生态承载力等级提升的因子.贵州省的表层岩溶带"二元"水生态承载力不仅关系到自身的社会、经济和生态安全也关系到下游的长江流域和珠江流域的水资源安全、生态安全以及环境建设.因此,应制定区域生态补偿措施,经济发达地区反哺经济落后地区,形成联动的共同保护生态环境脆弱区的水生态承载力的机制.为促进贵州省的水土资源开发利用和生态环境建设提供理论借鉴,并为类似地区的水生态承载力评价提供了一种新方法.     

水资源环境承载能力监测预警平台设计探讨

建立水资源环境承载力监测预警平台与机制,是实现我国环境管理战略由以环境污染控制为目标导向,向以环境质量改善为目标导向彻底转变的重要支撑手段。以水资源环境承载力领域的相关研究进展为基础,提出水资源环境承载力监控预警平台的设计框架,平台设计的逻辑结构、核心功能以及相对应的水资源环境承载力评估技术,并对该平台建设的困难、问题及未来的发展趋势进行了分析,以期为水资源环境承载能力监测预警机制建设提供有益的参考。     

炭化温度对废旧布袋制备活性炭性能的影响及其表征

以水泥厂废旧除尘布袋为原料,KOH为活化剂制备了活性炭.利用热重分析法(TG-DTG)对废旧布袋热解过程进行分析;重点考察了不同炭化温度(400、450、500、550和600℃)对废旧布袋制备活性炭的产率及活性炭的碘吸附值和亚甲基蓝吸附值的影响;同时采用N2吸附等温线对最佳工艺条件制备的活性炭孔隙结构进行了表征.研究结果表明,500℃为最佳炭化温度.最佳炭化温度下制备的活性炭,碘吸附值、亚甲基蓝吸附值和产率分别为1350.72 mg·g-1、97.5 mg·g-1和20.16%.活性炭比表面积高达1228.51 m2·g-1,总孔容达0.7134 cm3·g-1,孔径分布以微孔居多,N2吸附等温线为I型.     

SRHSC梁主要设计参数损伤敏感度分析

以型钢高强混凝土(SRHSC)梁为研究对象,结合SRHSC梁受力机理及承载能力的试验研究成果,提出了极限状态下的承载能力是评价梁力学性能的关键指标,将损伤前后梁正截面抗弯承载力之比和斜截面抗剪承载力之比的均值作为自变量,给出了SRHSC梁损伤表征函数,并借助"预定损伤法",揭示了主要设计参数对SRHSC梁损伤演化的影响规律。研究成果将为建立地震激励下SRHSC框架结构楼层损伤模型提供理论和数据支持。     

基于序关系法和熵值法的机场安全管理能力综合评价

为了客观科学地评价机场安全管理能力,研究了机场系统构成和安全管理概况,参考民航规章和专家咨询意见,确定安全管理能力的影响因素,建立了由4个准则层和23个具体指标组成的机场安全管理能力评价指标体系,结合实地调研结果及专家意见确定了各指标的测评方法和评分标准。根据序关系分析法和熵值法的特点,参考其他文献,提出了序关系分析法和熵值法相结合的、一种基于方差最大化的主客观赋权法来确定指标权重,构建了机场安全管理能力线性评价模型。结果表明,不同安全管理能力二级指标的变化对安全管理能力的影响程度不同,其综合权重大小降序排列为组织管理能力、人员安全能力、设备运行能力、环境保障能力。以长沙黄花国际机场为例进行评价,评价结果显示该模型具有可行性,能为机场安全管理工作提供参考。     

黄河三角洲海岸带生态承载力综合评价

为全面、深入认识黄河三角洲海岸带的海洋资源和生态环境特征、海洋产业结构及海洋经济发展的优势、劣势条件,选取工业废水排放量、固体废渣排放量、万元GDP能耗、岸线利用率、人均可开发海域面积、人均海岸线长度、海洋初级生产力、污染海域占海域总面积的比例、生物多样性指数、人口密度、人均海洋经济产值、GDP年均增速、科研与开发投入和环境保护支出等压力、状态、响应3类14个指标,采用压力-状态-响应模型对黄河三角洲海岸带生态承载力进行了综合量化评价.结果表明,2006-2010年黄河三角洲海岸带的承载指数和压力指数呈下降趋势,承压比则总体上呈上升趋势.根据评价结果,提出了构建高效生态产业体系、优化黄河三角洲产业空间布局、对传统产业进行生态化改造、发展新兴生态产业、保护黄河三角洲海岸带生态环境、对黄河三角洲海岸带海洋资源进行高效集约利用等提高黄河三角洲海岸带生态承载力的对策.     

活化改性半焦用于烟气脱硫催化剂制备工艺优化

为研究不同制备工艺条件下的烟气脱硫催化剂吸附去除烟气中硫化物的性能,采用硝酸活化的半焦脱硫剂,通过穿透时间和硫容评价所制备催化剂的脱硫性能.采用固定床反应器考察了催化剂表面基团酸碱性、催化剂成型的制备顺序、黏结剂和催化剂尺寸及负载金属氧化物等制备工艺条件对催化剂脱硫性能的影响.结果表明:原料半焦表面呈碱性,半焦经硝酸氧化改性后,表面呈酸性,高温煅烧可以使半焦表面酸性官能团分解成碱性官能团,催化剂表面净碱量越大,脱硫性能越好;采取先将半焦成型再进行高温煅烧、水气活化的工艺,脱硫活性更高;最适合的黏结剂为煤焦油;最佳的催化剂粒径为3mm;烟气中通入O2能显著提高半焦吸附催化剂的脱硫性能,O2体积分数以5％为宜,烟气中适量H2O是脱硫必不可少的条件,水汽体积分数以8％最佳;在催化剂制备过程中添加质量分数为1％的V2O5,可以明显改善催化剂的脱硫性能.     

Governing Quasi-Public Network Services for adaptation to climate change

Adaptation takes place in both private and public sectors, or as an interrelation between the two, and often under the realm of public regulation. Thispaper uses the Swedish and the Norwegian electricity grid sector, as providers of a vital public good under strict public regulation, to analyse reforms' effects on adaptive capacity in this area. The paper shows that transformational changes in both sectors during the 1990s shifted both the formal organisational structure (rules and regulations), as well as the organisational culture, in the direction of economic efficiency. These two dimensions individually reduced adaptive capacity to climate change, although differently in the two countries. However, the formal structure and organisational culture also yielded substantial influence on each other. This leads to the conclusion that when designing public regulations and implementing reforms, organisational culture must be considered in the design. Also the paper contests previous findings in the literature by showing that under given conditions there exist some substitution between the two dimensions in influencing adaptive capacity, implying that both dimensions should be included when analysing adaptation since analysing them in isolation is likely to lead to wrong conclusions.     

对叉车额定起重量的分析和探讨

本文对叉车的额定起重量和实际起重量之间的联系与区别进行了分析,指出了额定起重量只是供叉车设计使用的参数,建议不要将额定起重量标识在叉车铭牌上,叉车用户应按照载荷曲线图来确定操作时的实际起重量.     

Scenario-based assessment and multi-objective optimization of urban development plan with carrying capacity of water system

• Impact of urban development on water system is assessed with carrying capacity. • Impacts on both water resource quantity and environmental quality are involved. • Multi-objective optimization revealing system trade-off facilitate the regulation. • Efficiency, scale and structure of urban development are regulated in two stages. • A roadmap approaching more sustainable development is provided for the case city. Environmental impact assessments and subsequent regulation measures of urban development plans are critical to human progress toward sustainability, since these plans set the scale and structure targets of future socioeconomic development. A three-step methodology for assessing and optimizing an urban development plan focusing on its impacts on the water system was developed. The methodology first predicted the pressure on the water system caused by implementation of the plan under distinct scenarios, then compared the pressure with the carrying capacity threshold to verify the system status; finally, a multi-objective optimization method was used to propose regulation solutions. The methodology enabled evaluation of the water system carrying state, taking socioeconomic development uncertainties into account, and multiple sets of improvement measures under different decisionmaker preferences were generated. The methodology was applied in the case of Zhoushan city in South-east China. The assessment results showed that overloading problems occurred in 11 out of the 13 zones in Zhoushan, with the potential pressure varying from 1.1 to 18.3 times the carrying capacity. As a basic regulation measure, an environmental efficiency upgrade could relieve the overloading in 4 zones and reduce 9%‒63% of the pressure. The optimization of industrial development showed that the pressure could be controlled under the carrying capacity threshold if the planned scale was reduced by 24% and the industrial structure was transformed. Various regulation schemes including a more suitable scale and structure with necessary efficiency standards are provided for decisionmakers that can help the case city approach a more sustainable development pattern.